RESTAURANT + COMMERCIAL SINKS

SELF RIMMING SINKS
General Specifications:
  • Sinks are fully-coved and manufactured from 1.6mm (16 ga.) type 304 stainless steel
  • Each sink unit is provided with a 32mm (1 1/4 in.) perimeter mounting flange and clip supports
  • Crumb-cup style strainer drains are standard on all units.   Cornered with standing overflows are available as an option
  • Partially-radiused (front & back only).  Sink units with divider - add suffix "RFB" available
  • Available in 1, 2 and 3 bowls
UTILITY SINKS
General Specifications:
  • Sinks are semi-coved and manufactured from 1.6mm (16 ga.) type 304 stainless steel
  • Interior of basin compartments are radiused at front and rear to provide improved drainage and ease in cleaning
  • Galvanized-steel support legs are 41 mm (1 5/8 in.) diameter complete with adjustable leveling foot.
  • Standard 150 mm (6 in.) backsplash is provided
  • Available in 1, 2 and 3 bowls
INSTITUTIONAL SINKS
General Specifications:
  • Standard-duty dishtabling shall be manufactured from 1.6 mm (16 ga.) type 304 stainless steel. 
  • All sink units have fully-radiused joints and cove-cornered bowls, integral with top
  • Stainless steel tubular support legs and cross-bracing members are 41 mm (1 5/8 in.) diameter.  Legs are equipped with adjustable, self leveling feet.
  • Standard 200 mm (8 in.) high, splayed backsplash is provided with faucet mounting holes on 200 mm (8 in.) centers.
  • Individual or double drainboards are available as indicated.  Standard sink basin depths is 350 mm (14 in).
DISHTABLING
General Specifications:
  • Standard-duty dishtabling shall be manufactured from 1.6 mm (16 ga.) type 304 stainless steel.  heavy duty dishtabling from 2.0 mm (14 ga.) material
  • Dishtabling shall be provided up to a 760 mm (30 in.) depth as standard.  Normal integral backsplash height shall be 150 mm (6 in.)
  • Galvanized-steel, tubular leg supports and/or cross bracing shall be 41 mm (1 5/8 in.) diameter.  Legs shall be equipped with adjustable, self-leveling feet.
  • Available in 1, 2 and 3 bowls

Optional Accessories
  • Pre-rinse sink, basket, and spray hose assembly
  • Wall support bracket for spray hose
  • Lower storage shelving
  • Slanted , wall mounted sorting shelves
  • Rubber scrap block
  • Integral single and double pot sinks
  • Steam exhaust hoods for dishwasher
  • Stainless steel legs with bracing
MOBILE SINKS
General Specifications:
  • Fully-coved sink basin manufactured from 1.6 mm (16 ga.) type 304 stainless steel.
  • Rolled-rim safety edge perimeter on sink basin is standard.
  • Stainless steel tubular support legs, 41 mm (1 5/8 in.) diameter, are equipped with 100 mm. (4 in.) diameter swivel casters.  Legs are secured to sink basin by extended, reinforced, stainless steel gussets.
  • Sink basin is provided with a lever-action release drain having an extended tail-piece for ease in draining.