• Sinks are fully-covered and manufactured from 1.6mm (16 ga.) type 304 stainless steel
• Each sink unit is provided with a 32mm (1 1/4 in.) perimeter mounting flange and clip supports
• Crumb-cup style strainer drains are standard on all units.   Cornered with standing overflows are available as an option
• Partially-radiused (front & back only).  Sink units with divider - add suffix "RFB" available
• Available in 1, 2 and 3 bowls

General Specifications

• Sinks are fully-covered and manufactured from 1.6mm (16 ga.) type 304 stainless steel
• Interior of basin compartments are radiused at front and rear to provide improved drainage and ease in cleaning
• Galvanized-steel support legs are 41 mm (1 5/8 in.) diameter complete with adjustable leveling foot.
• Standard 150 mm (6 in.) backsplash is provided
• Available in 1, 2 and 3 bowls

• Standard-duty dishtabling shall be manufactured from 1.6 mm (16 ga.) type 304 stainless steel. 
• All sink units have fully-radiused joints and cove-cornered bowls, integral with top
• Stainless steel tubular support legs and cross-bracing members are 41 mm (1 5/8 in.) diameter.  Legs are equipped with adjustable, self leveling feet.
• Standard 200 mm (8 in.) high, splayed backsplash is provided with faucet mounting holes on 200 mm (8 in.) centers.
• Individual or double drainboards are available as indicated.  Standard sink basin depths is 350 mm (14 in).

• Standard-duty dishtabling shall be manufactured from 1.6 mm (16 ga.) type 304 stainless steel.  heavy duty dishtabling from 2.0 mm (14 ga.) material
• Dishtabling shall be provided up to a 760 mm (30 in.) depth as standard.  Normal integral backsplash height shall be 150 mm (6 in.)
• Galvanized-steel, tubular leg supports and/or cross bracing shall be 41 mm (1 5/8 in.) diameter.  Legs shall be equipped with adjustable, self-leveling feet.
• Available in 1, 2 and 3 bowls

• Fully-covered sink basin manufactured from 1.6 mm (16 ga.) type 304 stainless steel.
• Rolled-rim safety edge perimeter on sink basin is standard.
• Stainless steel tubular support legs, 41 mm (1 5/8 in.) diameter, are equipped with 100 mm. (4 in.) diameter swivel casters.  Legs are secured to sink basin by extended, reinforced, stainless steel gussets.
• Sink basin is provided with a lever-action release drain having an extended tail-piece for ease in draining.