REFRIGERATED COUNTERS

General Specifications

• Refrigerated counter and display cases shall be manufactured in either self-contained or remote styles as indicated by the appropriate model number designation.
• Counter tops shall be either 26 gauge (1.6 mm) stainless steel or 1-3/4 in. (42 mm) laminated, maple hardwood.
• Base cabinets shall have enameled-steel finish on back and sides, unless otherwise indicated.
• Display cases shall incorporate stainless steel tops, sides and where applicable, bottom shelves.  Thermopane glass shall be used for see-thru windows and sliding doors.  Plexi-glass shall be used for self-service flap doors.   Cases shall have fluorescent lighting.
• The interior of all refrigerated cabinets shall be stainless steel.  All units shall have foam insulated cabinet walls and doors.
• Interior shelved for display shall be chrome-plated wire.   Shelves for base cabinets shall be slatted or perforated aluminum.
• Air-cooled condensing units are standard on self-contained units.   Full height display case units incorporate an evaporator coil in each of the upper and lower sections

OPTIONS & ACCESSORIES

FOR ALL MODELS

	Evaporator Pan Electrical 115/1/60
	Cylinder Locks
	Sliding Door Locks Locking mechanism for sliding doors on display cases
	Plate Casters Two swivel c/w brakes and two rigid
Hinged Night Covers For Pizza Preparation Counters
Mirror Back For all display units
Hi-density Polyethylene Work Top in lieu of hardwood
Dial Thermometer For all units
Locking Bar Mechanism For sliding glass doors and/or flaps on display cases
Stainless Steel Finish On sides and/or back of counters

Click here to download a printable brochure